The Brilliant Redesign of the Soda Can Tab

The way things look.
Sept. 24 2012 3:44 AM

Pop Art

The brilliant redesign of the soda can tab.

120910_designBug_3

1970's Advertisement for Coca-Cola in a can.
Coca-Cola ad from the 1970s

Courtesy Coca-Cola.

As a child of the 1970s, I have a distinct and curious memory about the landscapes I inhabited: They glittered with glinting metal, not the gold of El Dorado but the effluvia of the consumer society. I am talking about aluminum can tabs.

If, as the saying goes, we are never more than three (or five, or 10) feet from a spider, so too did those little trinkets—a sturdy ring pull attached to a curled, wedge-shaped “tear strip,” the disposable remnant of the mechanism then used to open cans of beer or soda—rarely seem out of range: Studding the dirt dugouts of Little League, clustered near the concrete parking stops at convenience stores, sunk between seat cushions in cars, draped as a necklace around your friend’s stoner older sister. When Matthew Broderick needed to hack the payphone in War Games, his tool was right at his feet. The sand at Normandy is said to be 4 percent war shrapnel. The beaches in Florida were easily that in soda shrapnel, a fact recorded by the frustrated reactions of stooped snowbirds sweeping metal detectors. “I blew out my flip flop,” noted Jimmy Buffett, in the song that begat a lifestyle, “and stepped on a pop top.” He was not alone: In 1976, the New York Times, commenting on beach injuries at Rockaway, noted that “a large percentage were due to cuts inflicted by discarded pop tabs.”

There was an inherent problem in multipart portable consumer packaging: What to do with the sealing mechanism, once so vital and now so worthless (and dangerous), after you had opened the can? Often, it seemed, the answer was to simply chuck it. Another solution was to deposit the pulled tab in the can. While this may have been less environmentally injurious, it was not without its dangers. As an article in The Journal of the American Medical Association noted, at least seven children over a period of a little over three years had “been treated for complications of ingestion or aspiration of pull tabs from aluminum beverage cans.” One particularly pernicious problem is that aluminum often does not show up on X-rays; hence the appearance, in journals like Pediatric Emergency Care, of such startling articles as: “Swallowed Coke Can Tab: Is it Still Stuck in the Esophagus?”

Indeed, it was at a radiology conference in 1974 that a physician named Lee Rogers—who had inadvertently swallowed a can tab during a basketball game—broached the idea of the can tab hazard to the medical community. And it was this single panel at a medical conference that helped launch a revolution in the design of our aluminum cans. As described in the American Journal of Roentgenology, Rogers’ presentation triggered a media crusade, with more than 400 newspapers picking up the story. (Rogers, the AJR notes, also received negative feedback from the beverage industry, which was not keen on coming up for a costly replacement for an otherwise functional technology.) “Aluminum pull-tabs are now common elements of our environment and inevitable offenders as foreign bodies in the esophagus,” the Journal of Pediatrics sternly noted in 1978, sounding like a Red Scare-era FBI dossier.

Advertisement

Can tabs were an ecological disgrace and a threat to children: Is there a more potent nexus for citizen outrage? The hunt for a new and better design was on. But the irony is that the pull-tab, unveiled just more than a decade before, had been hailed as a remarkable solution to an age-old problem. As its inventor, an Ohio toolmaker named Ermal Fraze, put it, “I personally did not invent the easy-open can end. People have been working on that since 1800. What I did was develop a method of attaching a tab on the can top.”

Prior to Fraze’s invention, cans, both steel and aluminum, required a separate opener, the so-called “church key.” As Henry Petroski notes in The Evolution of Useful Things, Fraze was at a family picnic in 1956, where he found “plenty of beer but no church key,” and resorted to opening a brew via a car bumper. After an insomniac night and a spell at his workbench, Fraze had his concept. As Petroski describes, the actual engineering—getting a top that was easy enough to pull off but could withstand the force of the can’s pressure—was tricky: “Some early pull tabs were being blown off prematurely … so Fraze and other inventors came up with schemes to direct benignly the first whoosh of escaping gas away from the tab itself.”

But a decade later, the solution had become a problem, and the search for a better can closure began. In the early 1970s, Coors came up with its “environmental package,” a curious two-opening top—the first was a small pressure-release valve, the second was a larger aperture for drinking—that some readers may recall. Like Coors itself, which for a Midwesterner had a certain exotic appeal, there was an intriguing novelty to the design of the “press tab,” as the company called it; one that quickly lost appeal for drinkers (particularly those on the downward slope of a six-pack) trying to puncture through, and then retract their fingers from, the smaller, sharp-edged opening.

But Coors wasn’t the only experimenter; as the website Rustycans.com notes: “Crown, Cork, and Seal tried a top that you pressed down then slid a tab to one side, pushing a hole into the can top. Continental’s Envir-o-can required the consumer to pull a metal strip from the top of the can, revealing several small holes in the top from which to pour the beer.”

Coke soda can.
Coca-Cola in 2011.

Photograph by Joel Saget/AFP/Getty Images.

The solution came from Daniel F. Cudzik, an engineer with Reynolds Metals, who for years had been toiling away on what would what become known as the “Sta-Tab.” As Cudzik told Studio 360, his search for a “convenience top” that was “more practical and less prone to litter” came to fruition one night when he was in living room, “half watching a movie.” While the idea might seem simple to a consumer raised on nothing but stay-on tabs, the design required some elegant engineering (and some subsequent legal battles over alleged patent infringements).

As Cudzik described the problem in his 1975 patent application: “The opening construction of the invention requires a tab which must be stiff against transverse bending and yet flexible enough and tough enough at the connection between the tab end wall to permit lifting and retracting the tab without causing a fatigue crack at the connection.” As elegantly explained in this video, the design operates both as a “second class” and as a “first class lever” at different points in the can-opening process—redirecting loads and shifting the fulcrum—using the inherent pressure from the carbonated beverage in its favor.

When the Sta-Tab launched in 1975, on Falls City beer and, quickly, other beverages, there was initial period of consumer testing and education (as soberly described by the New York Times in 1976: “New Yorkers are now faced with a new problem: how to open the new Stay-On-Tabs on Coca-Cola cans currently being sold in New York”). But the Sta-Tab was here to stay.

From a waste point of view, the consequences were clear: Notes Petroski, this time in Invention by Design: In the 16 years after Cudzik’s patent, “the stay-on-tabs alone amounted to over 4 million tons of aluminum that was recovered and recycled rather than discarded.” Curiously, the problem of ingested tabs has not gone away: In 2010, an article in Pediatric Radiology identified 19 cases of accidental ingestion at a single children’s hospital (with the majority radiographically invisible). Also still with us: can tab arts and crafts.

Cudzik said on Studio 360 that he thought can tab design had reached a point “where I don’t believe there’ll be too many changes anymore.” But is design ever done? A 2007 study that looked at the ergonomics of can-tab pulling (using finite-element analysis to analyze the “deformation of the fingertip pulp”), for example, suggested that a larger tab would reduce discomfort. And there’s always another basement tinkerer on the horizon. A Canadian golf course groundskeeper, for instance, is making the rounds with a new “smart tab,” which tackles the ergonomics problem with a tab that curves slightly upwards. The tab also spins around to act as a kind of cover for the opening (to keep out debris and bees). Will it catch on? Who knows—but the work of design , as much as it is about eliminating obvious flaws, is also about bringing to light the things we only realize are problems the very moment we no longer have to live with them.

Tom Vanderbilt is author of Traffic: Why We Drive the Way We Do, now available in paperback. He is contributing editor to Artforum, Print, and I.D.; contributing writer to Design Observer; and has written for many publications, including Wired, the Wilson Quarterly, the New York Times Magazine, and the London Review of Books. He blogs at howwedrive.com and lives in Brooklyn, N.Y. You can follow him on Twitter at www.twitter.com/tomvanderbilt.

  Slate Plus
Slate Archives
Nov. 26 2014 12:36 PM Slate Voice: “If It Happened There,” Thanksgiving Edition Josh Keating reads his piece on America’s annual festival pilgrimage.